Specifications for PWC-2200

BRUNO PWC-2200 REAR WHEEL DRIVE POWER CHAIR SPECIFICATIONS
BASE LENGTH Overall: 38.8" (985 mm) BATTERY CHARGER Automatic, switch-mode, carry-along in rear compartment
BASE WIDTH 24" (609.5 mm) EMC TESTED To 40 volts/meter
SPEED 4.5 mph (7.24 kph) forward, 2.7 mph (4.35 kph) reverse BATTERIES (2) 12-volt U-1 @ 24 lb (10.89 kgs) each, Group 22 gel cell, optional
MAXIMUM CLIMBING ANGLE 12 degrees, 21% grade BATTERY WEIGHT U-1 @ 24 lbs (10.89 kgs) each, Group 22 @ 49 lbs (22.23 kgs) each
CURB CLIMBING HEIGHT 3" (76.2 MM) REAR WHEEL DRIVE (2) 24 Volt DC gearmotors; with independently suspended drive wheels
TURNING RADIUS Determined, using ANSI/RESNA test standards: 28" (711 mm) CONTROLLER 50 amp P&G Pilot
MAXIMUM RIDER WEIGHT 300 lbs. (136.08 kgs) TIRES Pneumatic, 14" x 3" (35.56 x 7.62 cm) rear, 8" x 2" (20.32 x 5.08 cm) front
BASE WEIGHT 100 lbs (45.36 kgs) without batteries & seat, 186 lbs (84.37 kgs) w/ U-1 batteries & seat, 236 lbs (107.05) kgs) w/ Group 22 batteries & seat FRAME Durable, formed steel, powder coated
SEAT WEIGHT 38 lbs. (17.24 kgs) SEAT DIMENSIONS Width - 17" (432 mm), Depth 14" - 17" (356 to 432 mm), adjustable - Back height - 17" to 20" (432 - 508 mm), adjustable armrest
RANGE U-1 batteries, up to 15 miles (24.14 km); Group 22 batteries, up to 20 miles (32.19 km) Track Tested                               WARRANTIES

18 month limited electronic warranty

24 month limited drive motor warranty

Lifetime limited frame warranty

Back